2″, 3″, 4″ Gutters
Can the gutter guard be installed on a 2″, 3″ or 4″ gutter?
The gutter guard is customizable. If your gutter is between 2″ and 4″, you can actually bend the gutter guard in half, back under itself, so that it’s half its width so it will fit the small gutter. When you install the gutter guard, try and retain between a 5 and 25 degree forward slant (positive slope) on the gutter guard once installed to ensure you have the front edge of our gutter guard lay flat on the front edge of your gutter so you have no gap, then you should achieve optimal performance.
Note: When an install requires bending of the mesh, it is considered a non-traditional install, which will require a little more work and time.
To bend the stainless steel mesh, put the gutter guard between two boards, clamp them down, then manually bend the mesh with your hands to the desired angle.